Axis Communications 5600 User Manual

Page 31

UNIX

ntosh

Section 3: Basic Installation

AXIS 5600 User’s Manual

Using ARP in

Windows and OS/2

Follow the instructions below to set the IP address using ARP:

1. Start a DOS window.

2. Type the following commands:

Example

The host will return

Reply from 192.168.3.191 ...

or a

similar message. This indicates that the address has been set and that
communication is established.

Notes:

❏ When using the Windows 95 implementation of ARP, change the

first line to:

arp -s

address>

, where

is the IP address of

your Windows 95 host.

❏ When you execute the

ping

command for the first time, you will

experience a significantly longer response time than is usual.

❏ By using the

arp -d

command, the static entry in the arp table is

removed from the host’s cache memory.

arp -s

ping

arp -d

arp -s 192.168.3.191 00-40-8c-10-00-86

ping 192.168.3.191

arp -d 192.168.3.191