AEG AGN71200F0 - Manual (Page 20)

9. Install the part (Ha) on the inner side of
the kitchen furniture.
10. Push the part (Hc) on the part (Ha).
11. Open the appliance door and the kitch-
en furniture door at an angle of 90°.
Insert the small square (Hb) into guide
(Ha).
Put together the appliance door and the
furniture door and mark the holes.
Remove the small squares and drill holes
with ø 2 mm at 8 mm from the outer
edge of the door.
Place the small square on the guide
again and fix it with the screws sup-
plied.
21 mm
ca. 50 mm
90°
ca. 50 mm
21 mm
Ha
Hc
Ha
Hb
8 mm
20 Installation