AEG F55020W0P - Manual (Page 9)

Multitab button
Press this button to activate or deactivate the multitab function (refer to 'Multitab func-
tion').
Programme knob
With the programme knob you can:
• Activate and deactivate the appliance
• Set a washing programme
• Adjust electronically the level of the water softener (refer to 'Setting the water softener')
• Activate or deactivate the rinse aid dispenser (only with the multitab function on).
To activate the appliance and set a washing programme
Turn the programme knob until the programme marker is aligned with one of the washing
programmes on the control panel.
• If the programme marker is aligned with a washing programme, the digital display shows
the programme time.
• If the programme marker is not aligned with a washing programme, the display shows
two horizontal status bar.
To deactivate the appliance
Turn the programme knob until the programme marker is aligned with the off position.
Setting mode
The appliance must be in setting mode for these operations:
• To set and start a washing programme
• To set and start a delay start
• To adjust electronically the level of the water softener
• To deactivate or activate the rinse aid dispenser (only with the multitab function on).
Activate the appliance. The appliance is in setting mode when:
• The programme time flashes in the display
• One or more phase indicator lights come on.
Activate the appliance. The appliance is not in setting mode when:
• The washing programme time or the delay start time do not flash in the display
• One or more phase indicator lights come on.
– It is necessary to cancel the programme or the delay start to go back to the setting
mode (refer to 'Select and start a washing programme').
USE OF THE APPLIANCE
1. Be sure that the set level of the water softener agrees with the water hardness in your
area. If not, adjust the water softener.
2. Fill the salt container with dishwasher salt.
3. Fill the rinse aid dispenser with rinse aid.
Use of the appliance 9