AEG F55020W0P - Manual (Page 11)

Manual adjustment
Turn the water hardness dial to the position 1 or 2
(refer to the table).
Electronic adjustment
Make sure that the appliance is deactivated.
1. Press and hold the Multitab button .
2. Turn the programme knob counterclockwise until the programme marker is aligned
with the first washing programme on the control panel.
3. Release the Multitab button when the display shows the set level of the water softener
(example: the display shows = level 5.
4. Press the Multitab button again and again until the display shows the new level.
5. Deactivate the appliance to confirm the adjustment.
If the water softener is set electronically to the level 1, the salt indicator light stays off.
USE OF DISHWASHER SALT
How to fill the salt container
1. Turn the cap counterclockwise and open
the salt container.
2. Fill the salt container with 1 litre of water
(only for the first time you fill with salt).
3. Use the funnel to fill the salt container
with salt.
4. Remove the salt around the opening of
the salt container.
5. Turn the cap clockwise to close the salt
container.
It is correct that water comes out from the
salt container when you fill it with salt.
Use of dishwasher salt 11