AEG CHARGING UNIT LM 1.5 - Manual (Page 40)

40
Error/Problem Possible cause Correction
Long charging
time only a very low charging current
is used in very low temperatures
(below 0 ºC). this will extend
the charging time. as the battery
warms up, the charging current is
adjusted accordingly. Charge battery in
normal conditions.
explosion hazard!
Never charge frozen
batteries.
Battery capacity too high for the
charger being used. Use a suitable
charger.
Battery voltage
too low Battery wasn’t charged long
enough. ensure the battery
is charged long
enough.
CLeaNiNg, Care aNd MaiNte-
NaNCe
▪
Clean clamps after every charging. to prevent corrosion, wipe off any battery
fluid which may have come into contact with the clamps.
▪
Carefully wind the cable when storing the device. this will help prevent acciden-
tal damage to the cable and the device.
▪
Clean the product with a soft, dry cloth.
▪
store the machine in a clean, dry place.
Service
should you have any questions regarding commissioning or operating in spite
of studying these operating instructions, or if a problem should occur against all
expectations, please get in contact with your specialist supplier.