AEG CHARGING UNIT LM 1.5 - Manual (Page 33)

GB 33
No. designation Function
1 seLeCt button for selecting the voltage
▪
LM 1.5 Microprocessor Charger:
6 V / 1.5 a or 12 V / 1.5 a
▪
LM 4.0 Microprocessor Charger:
6 V / 2 a or 12 V / 4 a
▪
Ld 5.0 Microprocessor Charger:
6 V / 2 a or 12 V / 5 a
▪
Ld 7.0 Microprocessor Charger:
6 V / 3.5 a or 12 V / 7 a
the red Led will light up next to 6 V
or 12 V
per the selection.
2 Ld 5.0 and Ld 7.0 Microprocessor Charger only:
dispLaY button for switching the display (whilst charging, 5 seconds after
switching the display will automatically switch back to displaying the current battery
voltage)
V indicates the battery voltage.
a indicates the charging current.
% indicates the battery charging status in percent.
3 Comfort plug connection
4 terminal connection cable (+) with clamp (red)
5 terminal connection cable (-) with clamp (black)
6 terminal connection cable (-) with ring lug (black)
7 terminal connection cable (+) with ring lug (red)
8 power cable with power plug
9 error red see “troubleshooting”.
10 Full (charged) green Lights up once the connected battery is fully charged.
11 Charge orange Lights up during the charging process.
12 power green Lights up whilst the charger is connected to the 230 V
mains socket.
13 Mounting option
14 Battery connection cable with on-board outlet comfort connection (accessory, sold
separately)