AEG Voxtel C115 - Manual (Page 17)

16
UK
14.9 Repeat/rewind
tTo repeat the current message from the beginning, press the OGM button .
tTo replay the previous message, press the OGM button twice.
14.10 Skip/fast forward
tTo skip to the next message, press the memo button .
14.11 Stop playback
tTo stop the message playback, press the stop button .
14.12 Volume Control
tUse the volume buttons to adjust the volume of the loudspeaker during playback, from the
6 levels available.
>The display shows the volume level setting on the screen when it is being adjusted.
14.13 To intercept a call
tIf you hear the answering machine recording a message, you can intercept the call and speak to
the caller, either by lifting the handset, or pressing the speakerphone button on the answering
machine, or by answering the call with another phone connected to the same line.
tAfter intercepting a call any recording up to the intercept will be saved as a new message.
>If you intercept a call within 3 seconds of its start, you may sometimes need to press the stop
button to stop recording.
14.14 To delete a recorded message
tDuring message playback, press the delete button .
>The display prompts “DELETE?”.
tPress the OK button to confirm.
>After the erasure is complete, the numeric order of the remaining messages will be rearranged.
14.15 To delete all old messages
tAfter playing back all of your messages, press and hold the delete button .
>The display prompts “DELETE ALL?”.
tPress the OK button to confirm.
>The display shows “DELETE ...“ and after a short delay you will hear “All messages erased”.
>The machine will not delete any new messages that have not been played.
>The display automatically returns to standby mode.
14.16 To go back to the default OGM
If you no longer want callers to hear the OGM‘s that you have recorded, you can delete them and
revert to the pre-recorded defaults as follows:
tMake sure the machine is switched on.
>If necessary, press and release the stop button to switch to the OGM you want to delete.
tPress the OGM button to play the current announcement.
tWhile the announcement is playing, press the delete button followed by the OK button .
>The display automatically returns to standby mode.
tPress the OGM button to play the pre-recorded OGM for confirmation.