AEG L75670WD - Manual (Page 18)

9.3 Setting and starting a
programme
1. Turn the programme knob. The rela-
ted programme indicator comes on.
2. The indicator of button 4 flashes
with red colour.
3. The display shows the default tem-
perature and spin speed. To change
the temperature and/or the spin
speed, press the related buttons.
4. Set the available functions. The indi-
cator of the set function comes on or
the display shows the related sym-
bol.
5. Press button 4 to start the pro-
gramme. The indicator of button 4
is on.
The drain pump can operate for
a short time when the appliance
fills water.
The appliance adjust auto-
matically the cycle time to the
laundry you have put in the
drum to have perfect washing
results in the minimum neces-
sary time. After approximate-
ly 15 minutes from the start of
the programme, the display
shows the new time value.
9.4 Interrupt a programme
1. Press button 4 . The indicator
flashes.
2. Press button 4 again. The washing
programme continues.
9.5 Cancel a programme
1. Press button 1 to cancel the pro-
gramme and to deactivate the appli-
ance.
2. Press button 1 again to activate
the appliance. Now, you can set a
new washing programme.
The appliance does not drain the
water.
9.6 Change a function
You can change only some functions be-
fore they operate.
1. Press button 4 . The indicator
flashes.
2. Change the function set.
9.7 Set the delay start
1. Press button 5 again and again un-
til the display shows the number of
minutes or hours. The related sym-
bols comes on.
2. Press button 4 , the appliance
starts the countdown of the delay
start.
When the countdown is completed,
the programme starts automatically.
Before you press button 4 to
start the appliance, you can can-
cel or change the set of the delay
start.
You cannot set the delay start
with the Steam programme.
9.8 Cancel the delay start
1. Press button 4 . The related indica-
tor flashes.
2. Press button 5 again and again un-
til the display shows 0’.
3. Press button 4 . The programme
starts.
9.9 Open the door
While a programme or the delay start
operates, the appliance door is locked.
To open the appliance door:
1. Press button 4 . The door lock
symbol in the display goes off.
2. Open the appliance door.
3. Close the appliance door and press
button
4 . The programme or the
delay start continues.
18 www.aeg.com