Avanti CK30-1 - Manual (Page 9)

9
Refrigerator Section
?
2 wire shelves
?
1 crisper with glass lid
?
Instruction Manual
INSTALLATION INSTRUCTIONS
? Before Using Your Compact kitchen
?
Remove the exterior and interior packing.
?
Check to be sure you have all of the following parts:
Kitchen Section
?
2 Wire Shelves
?
Faucet Set
?
Strainer
?
Strainer Plug
?
Backsplash and Assembly Screws (Only for model CK30 -1)
?
Instruction Manual
?
Before connecting the refrigerator of your Compact Kitchen to the power source, let it stand
upright for approximately 2 hours. This will reduce the possibility of a malfunction in the
cooling system of the refrigerator from handling during transportation.
?
Clean the interior surface with lukewarm water using a soft cloth.
? Energy Saving Tips
?
The Compact kitchen should be located in the coolest area of the room, away from heat
producing appliances, and out of the direct sunlight.
? Installation of Your Compact Kitchen
?
To eliminate the risk of burns or fire by reaching over heated surface units, cabinet storage
NOTE:
1. In order to remove crisper and/or shelves of refrigerator, a clearance A of
10 inches is required. When built-in, no clearance is required on either side.
2. B = 30 inches minimum clearance between the top of the cooking surface
and the bottom of an unprotected wood or metal cabinet.
Figure No. 1