beautypg.com

2 setting and starting a programme, The auto off function, Starting a programme – AEG F66682M0P User Manual

Page 32: Starting a programme with delay start, Opening the door while the appliance operates, Cancelling the programme, End of the programme

background image

CAUTION!

Only use detergent

specifically designed for

dishwashers.

1. Press the release button (A) to open

the lid (C).

2. Put the detergent, in powder or

tablets, in the compartment (B).

3. If the programme has a prewash

phase, put a small quantity of

detergent on the inner part of the

appliance door.

4. Close the lid. Make sure that the lid

locks into position.

9.2 Setting and starting a

programme

The Auto Off function

This function decreases energy

consumption by deactivating

automatically the appliance when it is not

operating.
The function comes into operation:

• 5 minutes after the completion of the

programme.

• After 5 minutes if the programme has

not started.

Starting a programme

1. Close the appliance door.

2. Press the on/off button to activate

the appliance. Make sure that the

appliance is in programme selection

mode.

3. Press Program again and again until

the indicator of the programme you

want to select comes on.

The display shows the programme

duration.

4. Set the applicable options.

5. Press Start to start the programme.

• The indicator of the running

phase comes on.

• The programme duration starts to

decrease with steps of 1 minute.

Starting a programme with

delay start

1. Set a programme.

2. Press Delay again and again until the

display shows the delay time you

want to set (from 1 to 24 hours).

3. Press Start to start the countdown.

• The delay indicator comes on to

confirm the start of the

countdown.

• The countdown starts to decrease

with steps of 1 hour. Only the last

hour will decrease with steps of 1

minute.

When the countdown is completed, the

programme starts and the indicator of

the running phase comes on. The delay

indicator goes off.

Opening the door while the

appliance operates

If you open the door while a programme

is running, the appliance stops. When

you close the door, the appliance

continues from the point of interruption.

Cancelling the delay start while

the countdown operates

When you cancel the delay start you

have to set the programme and options

again.
Press simultaneously Delay and Option

until the appliance is in programme

selection mode.

Cancelling the programme

Press and hold simultaneously Delay and

Option until the appliance is in

programme selection mode.

Make sure that there is detergent in the

detergent dispenser before you start a

new programme.

End of the programme

When the programme is completed the

display shows 0:00 and the end indicator

is on

www.aeg.com

32