AllerAir AirTube Supreme - Manual

Step 2
Gently lay unit up-side down. With
a screw driver, remove all 4 screws.
Step 3
Remove lid by pulling slightly on
cover.
Step 1
Turn Power Off and
unplug receptacle.
Step 5
To replace the electrostatic HEPA
filter, gently remove the filter from
carbon canister and replace with a
new one.
REPLACING FILTER ASSEMBLY-
AirTube Jr.
MODELS Air Tube Jr. Air Tube Air Tube Supreme
Carbon (Exec Models) 9" A2FCW301 9" A3FCW302 12" A3FCB401
Carbon (Vocarb Models) 9" A2FCW302 9" A3FCW303 12" A3FCB403
Micro-HEPA Wrap A2FMR002 9 x 21 A3FH0410 HEPA A3FH0420 HEPA
PRE-FILTER --------------------- A3FMP009 A3FMP012
Motor A2EL0040 A2EL0040 A2EL0040
Switch CMEL0046 CMEL0046 CMEL0046
Cord A3EL0046 A3EL0046 A3EL0046
Handle A4HD8414 A4HD8414 A4HD8414
Step 7
Place lid back to its proper position
by aligning screw holes.
Step 8
With a screw driver, place 4
screws back into their positions.
Step 4
Remove Carbon filter by placing
hands on the inner side of the filter.
Then pull up gently until totally out.
Step 6
Replace all filters with new ones
then reassemble by inserting the
Carbon filter.
AirTube
AirTube Supreme
AirTube Jr.
AllerAir Industries Inc. Toll free: 1-888-852-8247 / Fax: 1-877-688-2193 www.allerair.com
Operation and Maintenance Manual for
Air Tube Series
REPLACEMENT PARTS