Xerox WorkCentre M118i-6288 - Manual (Page 89)

Specifying Destinations
Xerox CopyCentre/WorkCentre 118 User Guide 89
Speed Dial
This feature allows you to specify the e-mail address quickly using a 3-digit code
assigned to the destination. For example, if you register the e-mail address to Speed
Dial code 123, you need only to enter “123” to automatically specify that registered e-
mail address. You can register up to 200 Speed Dial codes. When you register Speed
Dial codes 001-036, their codes are automatically assigned to One Touch buttons on
the control panel. Speed Dial codes are listed and can be searched for in the Address
Book. For more information on how to register Speed Dial codes, refer to Speed Dial
in the Setups chapter on page 159.
1. Press the button on the
control panel.
2. Enter a 3-digit code.
NOTE: If the 3-digit code entered is correct, the destination is displayed. If it is
incorrect, you are prompted to re-enter a 3-digit code.
One Touch Dial
This feature allows you to select preset Speed Dial codes 001–036 using One Touch
Dial buttons. One Touch Dial consists of the following three pages and you can change
the page using the flip cards.
• Page 1 displays Speed Dial codes 001–018.
• Page 2 displays Speed Dial codes 019–036.
• Page 3 displays Fax Programs p01–p18 (Fax Program is not available for the E-mail
feature).
1. If necessary, flip the One Touch panels
to access the required One Touch
button.
2. Press the One Touch button.
button
One Touch buttons