beautypg.com

Xerox WorkCentre M118i-6288 User Manual

Page 55

background image

Copying Features

Xerox CopyCentre/WorkCentre 118 User Guide

55

Auto
Selects an appropriate tray automatically according to the document size, amount of
reduction or enlargement.

Presets
Select a paper tray from Tray 1 to 5, depending on the trays available on the machine.
When Tray 5 (bypass tray) is selected, the [Paper Size] screen is displayed. After
selecting the paper size, the [Paper Type] screen is displayed.

[Paper Size] screen

This screen is displayed automatically when loading paper other than envelopes in
Tray 5 (bypass tray).
Use this screen to select a paper size for Tray 5 (bypass tray). You can also enter a
custom paper size using the [Variable Size] screen.
You can change the order of screens between the AB series screen including the A4
size and the Inches screen including the Letter size. For more information, refer to AB
Series/Inches in the Setups chapter on page 131.

1.

Set the paper in Tray 5 (bypass tray).

2.

Press the or button to switch
between screens to display the required
paper size.

3.

Select the required option.

4.

Press the button.

Presets
Allows you to select a paper size for Tray 5 (bypass tray). After you have selected one
of the presets, press the button to display the [Paper Type] screen.

Variable Size
Displays the [Variable Size] screen. Use this screen to enter a custom paper size for
Tray 5 (bypass tray) using the numeric keypad on the control panel. The sizes can be
entered within the range of 89–297 mm (3.5–11.7 inches) for width and 98–432 mm
(3.9–17.0 inches) for the length in 1 mm (0.1 inch) increment. If you select [Next] using
the