Powering off, Ground fault interrupter (gfi) – Xerox WorkCentre M118i-6288 User Manual
Page 35

Ground Fault Interrupter (GFI)
Xerox CopyCentre/WorkCentre 118 User Guide
35
1.
Press the power switch to the
position.
NOTE: If the machine does not start
up, check that the
on the side of the machine is in the
reset position.
Powering Off
If the Fax option is installed, make sure that the
control panel is off before you switch off the machine. If you switch off the machine
while the
be deleted. After charging for 30 hours, the machine is able to keep stored documents
for an hour.
NOTE: Wait at least 20 seconds between powering the system off and on. Failure to
do so could cause damage to the disk.
Ground Fault Interrupter (GFI)
If a fault is detected in the power supply to the machine, a Ground Fault Interrupter
(GFI) device on the machine automatically cuts all electrical power. If power is
interrupted, locate the
triggered, the
machine, press the
- WorkCentre M118i-4254 WorkCentre M118-M118i-4181 WorkCentre M118-M118i-6215 WorkCentre M118-6147 WorkCentre M118-4113 WorkCentre M118-M118i-2912 WorkCentre M118i-2985 WorkCentre M118-2844 WorkCentre M118-4133 WorkCentre M118i-6308 WorkCentre M118i-4274 WorkCentre M118-M118i-6242 WorkCentre M118i-3005 WorkCentre M118-6167 WorkCentre M118-M118i-4208 WorkCentre M118-M118i-2939 WorkCentre M118-2864