Customize screens, E-mail settings – Xerox WorkCentre M118i-6288 User Manual

Page 154

9 Setups

154

Xerox CopyCentre/WorkCentre 118 User Guide

Transmission Report
Configure the settings for printing report that shows the result of transmission.

• Single Destination – Configure the settings to be used when sending fax to a single

destination. If you select [Undelivered], the machine prints a report only when
transmission fails.

• Multiple destination – Configure the setting to be used when sending fax to multiple

destinations. If you select [Undelivered], the machine prints a report only when
transmission fails. With [As Single Dest’n] selected, the machine follows the setting
made for [Single Destination].

• Original Image – Specify whether to print out scanned documents with a report.

Activity Report
Specify whether or not to automatically print the report of the transmission result every
50 transactions.
NOTE: When the report output is disabled for reasons such as paper out, the machine
stores and retains the information until the output is enabled. However, only up to 96
of the latest transaction information can be stored.

Power Off Report
Specify whether or not print the Power Off Report that shows the details of stored
documents deleted due to the power failure. The machine automatically prints a report
when the machine is restarted.

Customize Screens

Use this feature to rearrange the locations of menu items on the Fax screen. After
selecting [Customize Screens], select the item you want to rearrange using the