Alto-Shaam ASC-2E - Manual (Page 18)

Electric Convection Oven - Manual Control • Pg. 17.
C L E A N I N G A N D P R E V E N T I V E M A I N T E N A N C E
E X T E R I O R :
To help maintain the protective film coating on
polished stainless steel, clean the exterior of the
cabinet with a cleaner recommended for stainless
steel surfaces. Spray the cleaning agent on a clean
cloth and wipe with the grain of the stainless steel.
Wipe control panel, door vents and door handles,
thoroughly since these areas harbor food debris.
Clean exterior glass surfaces with a commercial
window cleaner.
DO NOT USE ABRASIVE CLEANING COMPOUNDS.
M O T O R C A R E
The convection oven motor contains self-
lubricating, sealed ball bearings and is
generally maintenance-free. During operation,
the interior of the motor is cooled by air flowing
into the rear of the motor case. This is a general
operating feature when proper clearances have
been allowed.
A T T H E E N D O F T H E D A Y ,
U T I L I Z E T H E C O O L - D O W N M O D E
A N D O P E N T H E O V E N D O O R S .
T R O U B L E S H O O T I N G G U I D E
Oven has no power. Check to ensure oven is connected to proper
power source.
Oven has power
but will not turn
ON .
Ensure power switch is turned
ON
.
Ensure hi-limit is not tripped.
Ensure doors are closed.
Ensure timer is turned
ON
.
Ensure fan switch is turned
ON
.
Door switch is bad or out of adjustment.
Oven fan turns
ON
,
but there is no heat. Ensure thermostat is turned
ON
.
Ensure hi-limit is not tripped.
Oven heats, fan runs, but doesn’t
shut
OFF
when door is opened. Door switch is bad or out of adjustment.