Technical specifications – Alcatel-Lucent 5073 User Manual
Page 2

Technical Specifications
Interfaces
• Low-speed SS7 links
¬ 4 T1s/E1s per card
• High-speed SS7 links
¬ Unchannelized E1 links
(4 E1s per card)
¬ ATM/T1 (4 T1s per card)
¬ ATM/E1 (4 E1s per card)
¬ ATM/OC-3 (2 OC-3s per card)
• SS7 over IP (SIGTRAN)
¬ 10/100/1000 Mb/s Ethernet
¬ M2UA RFC 3331
¬ M2PA RFC 4165
¬ M3UA RFC 4666
¬ SUA RFC 3868
¬ Stream Control Transport
Protocol (SCTP) RFC 2960, 3309
SS7 Capacity
• 256 low-speed links
• 48 high-speed links:
ATM or unchannelized
• 48 T1/E1 spans
• 253 SCTP associations with up
to 25 secondary IP addresses
per association
• 128 SIGTRAN end points (M2UA,
M2PA, M3UA or SUA peer)
• Up to 128 SS7-over-IP connec-
tions across 12 10/100/100 Mb/s
Ethernet connections
• 128 link sets and 4096 route sets
• 4,096 destination point codes
• 50,000 global titles
• Up to 15,000 message signal
units (MSUs)/second for each
5073 SG (bi-directional)
Signaling Gateway
• SS7 signaling per ANSI, ITU,
SIGTRAN and Telcordia standards
• Global Title Translation (GTT)
• SIGTRAN M2UA adaptation layer
• SIGTRAN M2PA adaptation layer
• SIGTRAN M3UA adaptation layer
• SCTP multihoming
• SIGTRAN SUA adaptation layer
Signaling Applications
• TDM to M2UA
• TDM to M2PA
• TDM to M3UA
• TDM to SUA
• ATM to TDM
• ATM to M2UA
• ATM to M2PA
• ATM to M3UA
• ATM to SUA
• M2PA to M2UA
• M2PA to M3UA
• M2PA to SUA
• SCCP with GTT/TDM to SUA
• SCCP with GTT/ATM to SUA
• SCCP with GTT/M2UA to SUA
• SCCP with GTT/M2PA to SUA
Operations Support System
• Alcatel-Lucent 1300 Convergent
Network Management Center (CMC)
Operations
• JAVA WEB client GUI interface
browser with password security
• Command line interface
using RS-232 local or remote
workstations
• Online software upgrades
through Trivial File Transfer
Protocol (TFTP) with no down-
time for distributed systems
• SSH or TELNET access
• Alarms, events and measurement
data (statistics) through Simple
Network Management Protocol
(SNMP)
• Alarms are reported by
autonomous traps
• Troubleshooting and debugging
commands
¬ ping
¬ route
¬ traceroute
¬ ARP
¬ log files for troubleshooting
alarm severities
Physical Specifications
Height
• 1 RU: 1.75 in. (4.4 cm)
• 2 RU: 3.46 in. (8.8 cm)
• 4 RU: 7.0 in. (17.8 cm)
Width
• 1 RU: 17.0 in. (43.2 cm)
• 2 RU: 17.5 in. (44.4 cm)
• 4 RU: 17.2 in. (43.7 cm)
Depth
• 1 RU: 13.0 in. (33.0 cm)
• 2 RU: 12.5 in. (31.7 cm)
• 4 RU: 12.5 in. (31.7 cm)
• Optional rack mounting: 19 in.
(48.3 cm) or 23 in. (58.4 cm)
Power
• Power: -48 V DC nominal
• Typical power consumption
¬ 1 RU (fully loaded High
Availability [HA]): 400 W
¬ 2 RU (fully loaded HA): 400 W
¬ 4 RU (fully loaded HA): 500 W
Operating Environment
• Operating temperature:
23 F to 131 F (-5 C to +55 C)
• Relative humidity: 5% to 90%
• Storage temperature:
-40 F to +158 F (-40 C to +70 C)
Regulatory Compliance
• NEBS 3 certified
• CE compliant
• EMC: FCC Class A
• Safety: UL 60950
www.alcatel-lucent.com
Alcatel, Lucent, Alcatel-Lucent and the Alcatel-Lucent logo are trademarks of Alcatel-Lucent. All other
trademarks are the property of their respective owners. The information presented is subject to change
without notice. Alcatel-Lucent assumes no responsibility for inaccuracies contained herein.
© 2008 Alcatel-Lucent. All rights reserved. CAR2888080204 (03)
10/100/1000 Mb/s Ethernet
OC-3
T1/E1
IP
SCTP
IWF
IWF
MTP-3/b
SCCP
GTT
SUA
M3UA
M2
PA
A
TM/OC-3
A
TM/T1
A
TM/E1
Annex
A
LSL
M2UA
SSCF/SSCOP
MTP-2
Figure 1. 5073 SG Architecture