ADC AD-758DV - Manual (Page 25)

23
Telephone: (508) 678-9000 Fax: (508) 678-9447
Illus. No. Part No. Qty. Description
1 100109 1 4L-650 V-Belt (to idler assembly)
2 100701 1 3/16” x 3/16” x 1” Key
3 101130 1 5/8” x 2-1/2” Motor Pulley (50 Hz Only)
101133 1 5/8” x 2-1/4” Motor Pulley (60 Hz Only)
4 120200 1 3/8” x 90° Connector
5 181003 1 1/2 hp 208/230/380/460v 3ø 50/60 Hz Totally Enclosed, Fan-Cooled
(T.E.F.C.) Motor (56Z frame)
6 150501 4 5/16-18 x 3/4” Tap Bolt
7 153002 4 5/16” Lock Washer
8 153001 4 5/16” Flat Washer
9* 100007 1 1/2 hp 220/230/380/460v 3ø 50/60 Hz Totally Enclosed, Fan-Cooled
(T.E.F.C.) Motor with 3/4” Shaft (56Z frame)
10 120200 1 3/8” x 90° Connector
11 150501 4 5/16-18 x 3/4” Tap Bolt
12 153002 4 5/16” Lock Washer
13 153001 4 5/16” Flat Washer
14 154000 8 5/16-18 Tinnerman Nut
15 152004 7 5/16-18 Hex Nut
16 153002 7 5/16” Lock Washer
17 153001 7 5/16” Flat Washer
18 850021 1 Reversing Motor Mount ONLY (56Z frame)
804036** 1 60 Hz Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount
Assembly Complete
(includes illus. nos. 2 through 14 and 18 through 24)
804034** 1 50 Hz Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount
Assembly Complete
(includes illus. nos. 2 through 14 and 18 through 24)
19 117604 4 Neoprene Sponge Tape (sold by the foot)
20 153051 1 3/4” S.A.E. Flat Washer
21 100714 1 3/16” x 3/16” x 1-7/8” Key
22 802100 1 16” Impellor (1/2” bore) for 60 Hz Models Mfd. as of August 29, 2002 and
50 Hz Models Mfd. as of August 2, 2002
100604 1 12-1/2” Impellor (1/2” bore) for 60 Hz Models Mfd. prior to August 29, 2002
and 50 Hz Models Mfd. prior to August 2, 2002
23 153050 *** 1/2” S.A.E. Flat Washer
24 152006 2 1/2-20 Left Hand Jam Nut
* Check part number on motor data label to verify correct motor.
** Specify voltage when ordering.
*** As required.
Reversing T.E.F.C. Motor Mount Assembly