AEG DUNSTABZUGSHAUBE 825 D - Manual (Page 17)

33
C l e a n i n g
● Warning: always disconnect the hood from the mains
power supply before cleaning it.
Never insert pointed objects in the motor’s protective
grid.
●
Wash the outside surfaces using a delicate detergent
solution. Never use caustic detergents or abrasive brushes
or powders.
●
Only ever clean the switch panel and filter grille using a
damp cloth and delicate detergents.
●
It is extremely important to clean the unit and change the
filters at the recommended intervals. Failure to do so will
cause grease deposits to build up that could constitute a
fire hazard.
Special accessories
MKZ telescopic wall pipe E-Nr. 610 899 004
outlet hose ABS120 - 120 mm Ø 942 118 611
Carbon filter KFF 942 118 627
Technical assistance service
You are welcome to telephone our technical assistance
service (see list of technical assistance centres) whenever
you need information or in the unlikely event of a fault.
When calling, please be ready to specify:
1. The model code number
2. The serial number (E-Nr.)
3. The manufacturing number (F-Nr.)
This information is shown on the registration plate
inside the unit behind the grease filter grille.
We reserve the right to change specifications and colours
as a result of our policy of continuing technological
development.