Konica Minolta Magicolor 2490MF - Manual (Page 28)

NETWORK SETTING Menu 20
Subnet Mask
"
When “ IP ADDRESS ” is set to “ AUTO ”, this menu option is not avail-
able.
Notes A single digit number, such as “1”, cannot be input as “001”.
Align the number on the left and input “1” as “1 _ _”. Use
the
* and ) keys to move between triplets.
The Cancel/C key can also be used for deleting. To cancel
IP Address menu, hold down the Cancel/C key for more
than one second, and then press the Cancel/C key again
after all settings have been cleared.
After changing the settings, the printer must be turned off,
then on again.
Purpose Sets the subnet mask value of the network. The subnet
mask allows you to limit access to your printer (for exam-
ple, according to departmental divisions).
Range (If “IP ADDRESS” is set to “SPECIFY”)
0–255 for each xxx triplet
Use the keypad to input each number; use the Left and
Right keys to move between triplets.
Default (If “IP ADDRESS” is set to “SPECIFY”)
255.255.255.0
Notes A single digit number, such as “1”, cannot be input as “001”.
Align the number on the left and input “1” as “1 _ _”. Use
the * and ) keys to move between triplets.
The Cancel/C key can also be used for deleting. To cancel
Subnet Mask menu, hold down the Cancel/C key for more
than one second, and then press the Cancel/C key again
after all settings have been cleared.
After changing the settings, the printer must be turned off,
then on again.