2 specifying the search range, Specifying the search range – Konica Minolta BIZHUB C30P User Manual
Page 30
5 Option Setup
25
3.
Put a check mark into the box next to option you want to use under
Select Protocol
. You must select at least one protocol, however
both can be selected.
Click the
Return to standard setting
button to return to the
protocol to the standard default.
4.
Click the
OK
button.
5.
On the confirmation dialog box that appears, click the
OK
button.
5.2 Specifying the Search Range
When using IP protocol, perform the steps below to specify the
network device search range. Note that you cannot specify the search
range when using IPX protocol.
1.
Select
Option
on the
Setup
menu to display the
Option
dialog box.
2.
Click the
Specify Search Range
tab.
3.
A check mark is in the box next to the protocol that is currently
selected on the
Select Protocol
tab. See 5.1 Selecting a Protocol
for details about changing the protocol setting.