Konica Minolta PageScope Job Spooler - Manual (Page 34)

Using the PageScope Job Spooler Client 4
4-21
Specify the context name used for SNMPv3 transmission.
H Security Level
Select “NoAuth/NoPriv”, “Auth/NoPriv” or “Auth/Priv” as the
security level for SNMPv3 transmission.
H Authentication Password
Specify the password if “Auth/NoPriv” or “Auth/Priv” was selected
as the security level.
H Privacy Password
Specify the password if “Auth/Priv” was selected as the security
level.
3 Click the [Apply] button.
Security Setting
1 Double-click “Security Setting”.
H SSL Setting
Select whether to enable or disable SSL transmission. Specify a
value between 1 and 65535 for the HTTPS port number. The
default setting is “9071”.
H Other Setting
Specify the logout time. The default setting is “Off”.
Note
After an SSL setting is specified, restart the PageScope Job
Spooler server.
Do not set the HTTPS port number to 59070 or the same port
number specified with the PageScope Job Spooler server.