Konica Minolta bizhub C25 - Manual (Page 31)

Fax operations 6-2
Fax operations
d
For details, refer to the Facsimile User's Guide.
Basic fax operation
This section contains information on the general operation for faxing.
1
Press the Fax key to enter Fax mode.
2
Place the document in the ADF or on the original glass.
3
Specify the desired scan settings.
4
Specify the destination.
– If fax numbers have already been registered, a registered destination can be selected.
– When directly entering the fax number, use the keypad to type in the number.
– A document can be sent to multiple destinations at the same time (broadcast transmission).
5
Press the Start key.
The fax is sent.
– The fax is sent in black and white regardless of whether the Start (Color) key or the Start (B&W) key is
pressed.
– To scan multiple pages from the original glass, [NEXT PAGE?] appears in the message window. Place
the second document page on the original glass, and then press the Select key.
– If the Stop/Reset key is pressed while copying, [JOB CANCEL] appears in the message window. To
stop copying, select [YES]. To continue copying, select [NO].