Konica Minolta bizhub C300 - Manual (Page 213)

3 Specifying settings from the control panel
3-102 C300
Sp
ecifying
se
tt
ing
s
f
ro
m
th
e cont
ro
l pan
el
Chapter 3
2
Note
To cancel changes to the setting, touch [Cancel].
To quit specifying the Utility mode setting, touch [Exit] in the sub display
area or press the [Utility/Counter] key. Otherwise, cancel the Utility mode
by touching [Close] in each screen until the screen for the Copy, Fax,
Scan or Box mode appears.
NTP server address
The IP address of the NTP server can be specified.
1
In the Time Adjustment Setting, touch [Host Address].
The Host Address screen appears.
2
Touch [IP Address Input] or [Host Name Input].
– To specify the host address with the IP address, touch [IP Address
Input].
– To specify the host address with the host name, touch [Host Name
Input].
3
Enter the host address (IP address or host name (up to 255 charac-
ters)).
– To edit the values that you entered with “IP Address Input”, touch
[
←] or [→] to move the cursor to the desired area, touch [Delete],
and enter the new value.
– To clear all values, press the [C] (clear) key.
– If the host address exceeds 81 characters, touch [Details] to display
the Host Address Detail screen with the rest of the host addresses.
4
Touch [OK].
The NTP server address is set.