Konica Minolta bizhub 25 - Manual (Page 4)

2
ENGLISH
Installation
Do not place any liquids, metal objects (necklaces, paperclips, etc.) or
heating elements (candles, etc.) directly onto the machine.
Water and metal objects that penetrate the machine could result in electrical
shock, machine malfunction and/or fire.
Should a metal object, water or any other foreign substance penetrate the
machine, immediately turn OFF the power, unplug the power cord from the wall
outlet and call your authorized Konica Minolta dealer.
Do not place any volatile liquids, such as alcohol or paint thinners, near
the machine.
If liquids are spilled on the machine’s electrical components it may result in an
electrical shock or fire.
Do not place the machine on an unstable or tilted bench, or in a location
subject to a lot of vibration or shock.
If the machine drops or falls it could result in personal injury and/or machine
damage.
Do not place the machine in the following locations:
• A location exposed to direct sunlight
• A dusty location, or a site exposed to soot or steam
• A location subject to high temperature
• A location near open flames
• A location subject to a large range of temperature change
• A location subject to acid gas, alkaline gas or vapor
• A location near electrical devices which generate a magnetic field
• A wet location, or a location where water or other liquids can spill easy
If the machine is located near any of these conditions it may result in a
machine malfunction, electrical shock and /or fire.
Do not block the ventilation holes and louvers on the machine.
If the ventilation holes and louvers are blocked, heat could accumulate inside
the machine which may result in a fire.
Do not place or use the machine outdoors.
The machine was designed for indoor use only.
When installing unit with casters, lock the casters.
If the unit moves or falls it may result in personal injury and/or machine damage.