Konica Minolta bizhub 4050 - Manual (Page 69)

[Print Functions] 2-59
2.6 Printer driver setting items 2
2.6.9 Available operations in the [Finish] tab
The [Finish] tab allows you to configure a setting for finishing printed materials.
Tips
To use the staple function, the optional Finisher is required.
2.6.10 Available operations in the [Cover Mode] tab
In the [Cover Mode] tab, you can insert covers and pages.
Settings Description
[Staple] Select this check box to staple printed sheets of paper.
Select the staple position from the left or right corner.
Settings Description
[Front Cover] Select this check box to insert and print on a front cover. In [Front Cover Tray],
select the paper tray for the front cover. Then, select whether or not to print on
the inserted front cover.
•
[Blank]: Nothing is printed on the inserted front cover.
• [Printed (1-Sided)]: Select this option to print on one side of the sheet that
is inserted as a front cover.
• [Printed (2-Sided)]: Select this option to print on both sides of the sheet that
is inserted as a front cover.
You can set this option when you have selected anything other than [Auto] in
[Paper Tray] in the [Basic] tab.
[Back Cover] Select this check box to insert and print on a back cover. In [Back Cover Tray],
select the paper tray for the back cover. Then, select whether or not to print on
the inserted back cover.
•
[Blank]: Nothing is printed on the inserted back cover.
• [Printed (1-Sided)]: Select this option to print on one side of the sheet that
is inserted as a back cover.
• [Printed (2-Sided)]: Select this option to print on both sides of the sheet that
is inserted as a back cover.
You can set this option when you have selected anything other than [Auto] in
[Paper Tray] in the [Basic] tab.
[Separator Page] Select this check box when inserting a separator sheet for each job or copy to
make prints. Then, select the position to insert a separator page from [Header
(Each Job)], [Header (Each Copy)], and [Trailer (Each Copy)]. In [Separator
Page Tray], select a paper tray to load sheets to be used as separator pages.
You can set this option when you have selected anything other than [Auto] in
[Paper Tray] in the [Basic] tab.