Konica Minolta bizhub PRESS C1085 - Manual (Page 28)

Installation Space 2
2-20 bizhub PRESS C1100/C1085
2.4
2.4 Installation Space
Allow sufficient space for facilitating print operation, changing parts, and periodic inspection. Leave an ade-
quate space behind the machine to let hot air out from the rear fan.
Make sure there is enough space near the machine for Image Controller IC-308/IC-310 installation at your
site. You need a minimum of 8 inches (20 cm) at the back and sides of the Image Controller IC-308/IC-310,
as shown in the following illustration.
2.4.1 Installation Space for bizhub PRESS C1100/C1085
The whole machine may weigh approx. 1,990 (4,491 lb) at maximum, depending on the combination of op-
tions. Be sure to choose a level and solid floor for the installation place.
RU-511 - Main body - PF-708
RU-511 - Main body - PF-707
RU-511 - Main body - PF-707 SD-506 - RU-511 - Main body - PF-708