Konica Minolta bizhub C25 - Manual (Page 28)

Scan operations 5-2
Scan operations
d
For details, refer to chapter 7, "Using the Scanner, of the Printer/Copier/Scanner User's Guide.
Basic scan operation
This section contains information on the general operation for scanning.
1
Press the Scan key to enter Scan mode.
2
Place the document in the ADF or on the original glass.
3
Specify the desired scan settings.
4
Specify the destination.
– If destinations have already been registered, a registered destination can be selected.
– To directly type in the destination address, use the keypad.
– A document can be sent to multiple destinations at the same time (broadcast transmission).
5
To scan color scans, press the Start (Color) key.
To scan black and white scans, press the Start (B&W) key.
– To scan double-sided document pages using the ADF, place the document in the ADF for the back side
to be scanned, and then press the Select key.
– If the Stop/Reset key is pressed while copying, [JOB CANCEL] appears in the message window. To
stop copying, select [YES]. To continue copying, select [NO].