Konica Minolta 7013 - Manual (Page 11)

11
MONITOR MONITOR MONITOR /CALL MONITOR MONITOR /CALL GROUP
The LCD will show the default
paper size for the bypass tray.
If you want to change it, proceed to step 6.
Otherwise, skip to step 8.
5
Press
BYPASS
to change the paper
size. The LCD will show:
Pressoruntil your desired
recording paper size appears.
If you select “Other”, press . Then pressor
until your desired recording paper size appears.
Set Bypass Ppr:A4
/ /Enter
6
When you use transparency film,
select “Other”, then “OHP”.
Press
START
.
9
Enter the number of
copies.
8
Press
ENTER
.
7
If you want to change the default paper size for
the bypass tray:
1. Press Program key, B , 1, 0, 1, ENTER .
2. Press ENTER until “Bypass Tray” appears.
3. Pressoruntil the paper size you want
appears.
4. Press ENTER to save the setting.
Helpful Tip