Konica Minolta bizhub 421 - Manual (Page 74)

501/421/361 3-12
Using fax/scanning functions 3
3.2.4 Directly typing in the number
Follow the procedure described below to directly type in the fax number or the
registration number for an address book destination during a fax transmission.
2
Note
If "Manual Destination Input" in Administrator mode is set to "Restrict", a fax
number cannot be entered. For details on specifying the setting for the "Manual
Destination Input" parameter, refer to the User’s Guide [Network Administrator].
If user authentication is applied, whether or not to accept "Manual Destination
Input" is specified for each registered user. For details on the user registration,
refer to the User's Guide [Copy Operations].
1
Touch [Fax Number].
The Fax Number screen appears.
2
Using the control panel keypad or the keypad that appears in the touch
panel, type in the fax number.