Audiovox VOH1042 DL - Manual (Page 8)

REMOTE CONTROLLED VCP FUNCTIONS
These features can only be used with an Audiovox Video
Tape Player, if this option was installed with your video
package. For more information consult the Audiovox
VCP Owner’s Manual.
11. POWER BUTTON
This button is used to turn the VCP on and off.
12. “REW” REWIND BUTTON
If this button is pushed while the tape is stopped, the
Video Tape will rewind. If this button is pushed while
the tape is playing, the VCP will go into rewind search
mode.
13. PLAY BUTTON
Press this button to activate play mode while a Video
Tape is loaded into the VCP. This button may also be
used to disengage search and pause modes.
14. “FFWD” FAST FORWARD BUTTON
If this button is pushed while the tape is stopped, Video
Tape will fast forward. If this button is pressed while
the Video Tape is playing, the VCP will go into fast
forward search mode.
15. REPLAY BUTTON
Pressing this button will rewind the Video Tape and
immediately begin playback when the Video Tape is
fully rewound.
16. STOP BUTTON
Press this button to stop the Video Tape.
8. AUTO MEMORY BUTTON
When the AUTO MEMORY BUTTON is depressed,
all channels in TV mode are searched and all
channels with strong signals detected are
automatically stored.
9. SKIP/SEARCH BUTTON
This button selects between SKIP and SEARCH
mode. In “SKIP mode” the TV only stops on
channels that are programmed into memory when
the CHANNEL UP/DOWN buttons are used. When
the SKIP mode is turned off, the TV will stop on all
active channels.
10. ERASE/WRITE BUTTON
When tuned to a channel press this button to store
or erase the channel from memory. The stored
channel numbers are displayed in “GREEN” on the
screen, and the erased channels are in “RED”.
When skip mode is on, the VOH1042 DL will tune to
only the stored channels when using the CHANNEL
UP/DOWN buttons.
-7-