Audiovox VOH1042 DL - Manual (Page 11)

OPTIONAL ACCESSORIES
WIRELESS HEADPHONES
The VOH1042 DL includes a built in Infrared
Transmitter for use with Audiovox Wireless
Headphones (P/N MVIRHS). Turning the Headphone
switch ON will activate the internal IR Receiver; the
volume can then be adjusted using the controls on
each headset. Any number of wireless headphones
can be used, but all must be within a line of sight from
the transmitter, as infrared transmissions, like visible
light travel only in a straight line.
The VOH1042 DL has a Jack labeled “to FM
Transmitter”, this Jack is for connection of an optional
Audiovox RF Transmitter (P/N WTXRF01). This
Transmitter is for use with the Audiovox Wireless RF
Headphones (P/N WHPRF01).
Consult the documentation accompanying the
Audiovox Wireless Headphones for more information.
AUXILIARY A/V STEREO INPUTS JACK
The VOH1042 DL may be equipped with an auxiliary
A/V stereo input connector (optional).
These inputs are provided to facilitate the temporary
connection of optional audio/video equipment, such as
a camcorder or video game system. To play a source
with these inputs, an RCA patch cord is required to
connect the audio/video signals to their respective
jacks. Mono audio sources will require the use of an
RCA Y-cable (P/N 0892165) to connect to both right
and left inputs, if patch cords are installed into the
AUX inputs, the VIDEO INPUT 2 will be temporarily
bypassed. Once the connections have been made,
turn the VOH1042 DL on and press the source button
on the VOH1042 DL or the TV/Video button on the
remote control until “Video 2” is displayed on the
screen. The unit will now play the audio and video
signals from the accessory connected. The remote
control will not operate the accessory components.
VOH1042 DL Jack Panel
HEADPHONES HEADPHONES AUDIO R AUDIO L VIDEO
-10-