Konica Minolta bizhub 454e - Manual

Job List screen
A61D-9566PO-11
3
1
4
5
2
1. Pull out the desired tray. 2. Slide the lateral guides to fit the
size of paper to be loaded.
3. Load the paper into the tray.
Multiple Jobs
From the Job List screens, multiple jobs can be managed.
The Job List screen can be displayed if [Job List] is tapped
while the Basic screen is displayed in the touch panel.
1
Position the original to be copied.
To stop copying, press
the Stop key.
6
Press the Start key.
To change the setting for the number
of copies, tap [C], and then specify
the desired number of copies.
5
Specify the number of copies.
Place the original face
down on the original glass. Load the original face up
into the reverse automatic
document feeder.
Print copies at full size
on paper of the same
size as the original.
The finishing method and various
other settings can be specified.
(Original)
“Contrast” Parameter
“Copy Density” Parameter
“Sharpness” Parameter
(-3)
(-3)
(-3)
1
Displays a list of the
jobs queued to be
printed
2
Displays a list of the
jobs that have been
printed
3
Queued jobs can be
prioritized (interrupt
printing) so that they
will be printed before
other jobs.
4
Displays the settings
for a job that is queued
to be printed
5
Displays detailed
information for the
selected job
(+3)
(+3)
(+3)
2
3
4
For more detailed operating procedures and instructions, refer to the User’s Guide.
The images that are provided are print samples.
They may slightly differ in color with actual copies.
Making Copies Loading Paper
Edit Functions Adjust Parameters
Using the Machine
“Mirror Image”
Function
Produces a copy in the
mirror image of the
original
“Neg-/Pos. Reverse”
Function
Produces a copy with the
light- and dark-colored
areas of the original
image inversed
LCT
(built-in)
Large Capacity
Unit (Option)
Tray 1/2/3/4
1. Press the tray release button, and then pull out
the LCT (built-in).
2. Load the paper into the right and left sides of the LCT
(built-in).
Press [Original Type], and then
specify the desired settings.
Press [Density], and then specify
the desired settings.
Press [Duplex/Combine], and
then specify the desired settings.
1. Open the upper door of the large-capacity
paper feed unit.
2. Lift up the paper take-up roller, and then load the
paper into the tray.