Konica Minolta bizhub 4050 - Manual (Page 4)

3
● Changing replaceable lithium batteries used in products
CAUTION:
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES
ACCORDING TO THE USER’S GUIDE.
● For EU member states only
This product complies with RoHS (2011/65/EU) directive.
● Notification for California Customers in United States
This product uses a CR Lithium Battery which contains perchlorate material.
This perchlorate warning applies to perchlorate-containing lithium batteries sold or distributed in California, USA.
"Perchlorate Material - Special handling may apply, See www.dtsc.ca.gov/ hazardouswaste/perchlorate."
● Telephone Cable
Connect a telephone cable with a ferrite core to the telecommunication port of this machine. (Connect the modular jack on
the ferrite-core-equipped end of the telephone cable to the telecommunication port.)
In addition, connect a telephone cable with a ferrite core to the port for connecting a telephone. (Connect the modular jack
on the ferrite-core-equipped end of the telephone cable to the port for connecting a telephone.)
If there is no ferrite core attached to the cable, radio wave reception failures for radios and televisions may occur. Follow the
instructions shown below to attach a ferrite core.
Loop the cable through the ferrite core once.
Ensure that the cable is not pinched by the ferrite core.
Attach the ferrite core 20 mm (+/-5 mm) away from the connector.
● USB Host
Connect USB devices (Memory, Authentication, Hub etc.) devices directly to the USB host. If an extension cable is used,
electromagnetic interference could occur.
■ Regulatory notices for telecommunication terminal equipment
This section contains regulatory information pertaining to products that contain telecommunication terminal equipment such as
facsimile.
●Special Notice to User
- For Canada
NOTICE:
This product meets the applicable Industry Canada technical specifications. The Ringer Equivalence Number is an
indication of the maximum number of devices allowed to be connected to a telephone interface. The termination on an
interface may consist of any combination of devices subject only to the requirement that the sum of the RENs of all the
devices does not exceed five.
AVIS:
Le present materiel est conforme aux specifications techniques applicables d'Industrie Canada.
L'indice d'equivalence de la sonnerie (IES) sert a indiquer le nombre maximal de terminaux qui peuvent etre raccordes a
une interface telephonique. La terminaison d'une interface peut consister en une combinaison quelconque de dispositifs,
a la seule condition que la somme d'indices d'equivalence de la sonnerie de tous les dispositifs n'excede pas 5.
- For U.S.A.
FCC PART 68 REQUIREMENTS:
This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the cover of this
equipment is a label that contains, among other information, a product identifier in the format US:AAAEQ##TXXXX. If
required, this information must be provided to the telephone company.
This equipment uses certification jack USOC RJ11C.
A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the
applicable FCC Part 68 rules and requirements adopted by the ACTA.
A compliant telephone cord and modular plug is provided with this product. It is designed to be connected to a
compatible modular jack that is also compliant. See installation guide for details.
The REN is used to determine the number of devices that may be connected to a telephone line. Excessive RENs on a
telephone line may result in the devices not ringing in response to an incoming call. In most but not all areas, the sum of
RENs should not exceed five (5.0).
To be certain of the number of devices that may be connected to a line, as determined by the total RENs, contact the
local telephone company For products approved after July 23, 2001, the REN for this product is part of the product
identifier that has the format US: US:AAAEQ##TXXXX.. The digits represented by ## are the REN without a decimal
point (e.g., 03 is a REN of 0.3). For earlier products, the REN is separately shown on the label.
If this equipment causes harm to the telephone network, the telephone company will notify you in advance that
temporary discontinuance of service may be required. But if advance notice isn't practical, the telephone company will
notify the customer as soon as possible. Also, you will be advised of your right to file a complaint with the FCC if you
believe it is necessary.
The telephone company may make changes in its facilities, equipment, operations or procedures that could affect the
operation of the equipment. If this happens the telephone company will provide advance notice in order for you to make
necessary modifications to maintain uninterrupted service.
If trouble is experienced with this equipment, for repair or warranty information, please contact the Konica Minolta
dealer location where you purchased this equipment. If the equipment is causing harm to the telephone network, the
telephone company may request that you disconnect the equipment until the problem is resolved.
Connection to party line service is subject to state tariffs. Contact the state public utility commission, public service
commission or corporation commission for information. If your home has specially wired alarm equipment connected to
the telephone line, ensure the installation of this equipment does not disable you alarm equipment. If you have
questions about what will disable alarm equipment, consult your telephone company or a qualified installer.0
The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or other electronic
device, including FAX machines, to send any message unless such message clearly contains in a margin at the top or
bottom of each transmitted page or on the first page of the transmission, the date and time it is sent and an
identification of the business or other entity, or other individual sending the message and the telephone number of the
sending machine or such business, other entity, or individual.
(The telephone number provided may not be a 900 number or any other number for which charges exceed local or long-
distance transmission charges.)
WARNING/CAUTION Explained
WARNING
The exclamation point within an equilateral triangle followed by the word “Warning” is intended to alert the user to the
possibility that a disregard for the warning may result in fatal hazards or critical injuries. Be sure to focus your attention
on the Warning headings when reading the User's Guide.
CAUTION
The exclamation point within an equilateral triangle followed by the word “Caution” is intended to alert the user to the
possibility that a disregard for the caution may result in minor injuries or in physical damage. Be sure to focus your
attention on the Caution headings when reading the User's Guide.