Konica Minolta magicolor 3730DN - Manual (Page 161)

Configuring the Printer 5-24
Interface Information
The System - Device Information - Interface Information window provides
the following information.
Item Description
Protocol
Information Bonjour If Enable is displayed, Bonjour is enabled.
If Disable is displayed, Bonjour is disabled.
IPP If Enable is displayed, IPP is enabled.
If Disable is selected, IPP is disabled.
LPD If Enable is displayed, LPD is enabled.
If Disable is selected, LPD is disabled.
RAW Port Enable is displayed.
SNMP If Enable is displayed, SNMP is enabled.
If Disable is selected, SNMP is disabled.
Network
Information Type Identifies the type of network interface
installed on the printer (Ethernet 10Base-T/
100Base-TX).