Konica Minolta bizhub 4750 - Manual (Page 5)

[Copy Functions] 1-3
1.1 Copying (basic operation flow) 1
% For details on copy settings, refer to the respective columns of the following table.
4
If necessary, specify the number of copies using the Keypad.
% Tapping [No. of Sets] displays the Keypad.
% If [Keypad] is assigned to a Register key, you can press the Register key to display the Keypad on
the Touch Panel and enter data.
% To re-enter the number of copies, tap [C].
5
Press the Start key.
% If necessary, before starting a copy, tap [Check Settings] to check the settings.
% If you press the Stop key while scanning the original, scanning stops. To cancel scanning the orig-
inal, delete inactive jobs from the Job screen.
The original is scanned, and copying starts.
Related setting
You can change the default copy settings to suit your environment.
To configure settings: [Utility] - [User Settings] - [Copier Settings] - [Default Copy Settings]
Purpose Reference
To specify the image quality, density, etc. for copying page 2-2
To reduce paper consumption using 2-sided copying or the Combine function page 3-2
To change the size or type of the paper to be copied page 4-2
To specify the original scanning method and copy output method page 5-2
To add the date, page number, stamp, etc. on copied documents page 6-2