AEG KO-LAMAVAT 76730 - Manual (Page 42)

Installation and connection instructions
42
Installation of the appliance
3 Washing machines with curved panels are not suitable for installing
under units.
Transporting the appliance
• Do not place the washing machine on its front or on its right side
(viewed from the front). Otherwise, electrical components can get
wet.
• Never transport the unit without the transport safeguard. Do not re-
move the transport safeguard until the appliance is at the installation
location. Transporting the unit without the transport safeguard can
damage it.
• Lift the appliance neither by an open filling door nor by the base.
When transporting the unit with a sack trolley:
• Attach the sack trolley only at the side. The sack trolley shovel must
not be longer than 24 cm, otherwise the float switch can be de-
stroyed.
Remove transport packaging
Important! It is essential to re-
move the transport packaging be-
fore putting the appliance into
operation. Keep all parts of the
transport packaging in a safe
place for future use.
0 1. Open both hose holders on the
appliance's rear side and remove
the hoses and mains cable.