Konica Minolta bizhub PRESS C1100 - Manual

bizhub PRESS C1100/C1085 User's Guide
Errata and Additional Information
Thank you very much for your purchase of this product.
The following descriptions have been modified or added in the HTML version of the User's Guide.
Please make
the correction given in the table below.
Please keep this sheet with care so that it is readily available for reference.
KONICA MINOLTA, INC.
< Errata 1 >
Directory
Application > Web Utilities: Web Tool of
this machine
Fixed Description on the Real-time Remote
Panel
Incorrect Correct
The description regarding
the Real-time Remote
Panel is included. The Real-time Remote
Panel is not currently
available.
< Additional Information 1 >
Directory Paper and Originals > Replenish Paper
> Replenish Tab Papers > Loading Tab
Papers in Paper Feeder Unit
PF-707/PF-708
Fixed Installing the Tab Paper Guides to the
Tray
In order to load tab papers in Paper Feeder Unit
PF-707/708, the tab paper guides included with the
main body need to be installed on the tray. The tab
paper guides can be installed on any one of the
Upper, Middle, or Lower tray.
1.
Withdraw a paper feeder unit tray to be load
with tab papers.
2. Remove the 4 screws (2 screws for each
position), and then install the 4 positioning
screws (2 screws for each position) instead.
3.
Insert the tab paper guides (2 pieces) into the
positioning screws on the side guides.
NOTICE
Install them so that the arrow marks are in the
position as illustrated below.
NOTICE
Hold the paper control levers (2 pieces) in the side of
the rear guide.
Do not move to the front side.
Otherwise, the paper feeding performance may
degrade.