Konica Minolta KIP Color 80 - Manual (Page 3)

Scanning To An SMB Mailbox
Using Mac OS X Leopard
This information is solely for use of KIP Personnel and KIP Authorized Dealers. No part of this publication may be copied,
reproduced or distributed in any form without express written permission from KIP. © 2008.
- 1 -
Scanning to an SMB mailbox using Mac OS X
Note – This procedure was performed on Mac OS X 10.5 “Leopard”. It should be similar in other versions
of OS X but some of the screens may differ.
1. File sharing must be enabled in order for the KIP to see the Mac
on the network. Run “System Preferences” from the dock, or use
the mouse to select the apple in the upper left-hand corner and
choose “System Preferences…” from the pull down list.
2. Under System Preferences, select
“Sharing” from “Internet & Network”