Lenovo S40-70 Notebook User Manual

Page 18

Text mode
Original mode

Chapter 2. Learning the basics

Setting hotkey mode

By default, the hotkey functions are accessible by pressing the appropriate
hotkey. However, you can disable the hotkey mode in the BIOS setup utility.
To disable the hotkey mode:
1 Shut down the computer.
2 Press the Novo button and then select BIOS Setup.
3 In the BIOS setup utility, open the Configuration menu, and change the

setting of HotKey Mode from Enabled to Disabled.

4 Open the Exit menu, and select Exit Saving Changes.

Note:

When hotkey mode is disabled, press the Fn key and the appropriate hotkey to access
the corresponding hotkey function.