Asus P5GPL-X SE - Manual (Page 75)

ASUS P5GPL-X SE 2-29
Resume On By PCI/PCIEX Devices [Disabled]
When set to [Enabled], this parameter allows you to turn on the system
through a PME# device. This feature requires an ATX power supply that
provides at least 1A on the +5VSB lead.
Configuration options: [Disabled] [Enabled]
Power On By PS/2 Keyboard [Disabled]
Allows you to use specific keys on the keyboard to turn on the system.
This feature requires an ATX power supply that provides at least 1A on the
+5VSB lead. Configuration options: [Disabled] [Enabled]
Wakeup Password
This item appears only when the Power On By PS/2 Keyboard is set to
Enabled. Select this item to set or change the keyboard wakeup password.
The Keyboard Wakeup Password item that appears below shows the default
Not Installed. After you have set a password, this item shows Installed.
Power On By PS/2 Mouse [Disabled]
When set to [Enabled], this parameter allows you to use the PS/2 mouse
to turn on the system. This feature requires an ATX power supply that
provides at least 1A on the +5VSB lead.
Configuration options: [Disabled] [Enabled]
The computer cannot receive or transmit data until the computer and
applications are fully running. Thus, connection cannot be made on the
first try. Turning an external modem off and then back on while the
computer is off causes an initialization string that turns the system
power on.
RTC Alarm Hour [12]
Sets the RTC alarm hour. Use the plus (+) or minus (-) keys to adjust
the values. Configuration options: [00] [01] ~ [23]
RTC Alarm Minute [30]
Sets the RTC alarm minute. Use the plus (+) or minus (-) keys to
adjust the values. Configuration options: [00] [01] ~ [59]
RTC Alarm Second [30]
Sets the RTC alarm second. Use the plus (+) or minus (-) keys to
adjust the values. Configuration options: [00] [01] ~ [59]
Resume On By External Modems [Disabled]
This allows either settings of [Enabled] or [Disabled] for powering up the
computer when the external modem receives a call while the computer is in
Soft-off mode. Configuration options: [Disabled] [Enabled]