Lenovo ThinkCentre M70z - Manual (Page 27)

• If your computer comes with a frame stand, pull the frame stand open and
adjust the position of the computer at an angle between 15° to 35° from the
vertical.
CAUTION:
Make sure that the angle is at least 15° from the vertical; otherwise, the
computer might be unstable and fall over.
15°
35°
• If your computer comes with a lift stand, adjust the position of your computer
at an angle between -5° to 25° from the vertical.
Turning on computer power
Turn on the monitor and other external devices first, and then turn on the computer.
When the power-on self-test (POST) is finished, the logo window closes. If your
computer has preinstalled software, the software installation program starts.
Completing the software installation
Important: Read the license agreements carefully before using the programs on
this computer. These agreements detail your rights, obligations, and warranties
for the software on this computer. By using these programs, you accept the terms
of the agreements. If you do not accept the agreements, do not use the programs.
Instead, promptly return the entire computer for a full refund.
Chapter 3. Setting up your computer
21