AGFA CL30 - Manual (Page 36)

36 ePhoto CL30 User’s Guide
Using the Camera with a Computer
Connecting to Your Computer
Your ePhoto CL30 comes with a serial cable and a USB (Universal
Serial Bus) cable. The cable you use depends on the type of connec-
tion that your computer supports.
Use these guidelines to select a cable:
Using the Serial Cable
To use the serial cable to connect the camera to your computer:
1. Plug the one end of the serial cable (included) into the SERIAL
port on your camera.
2. Plug the other end of the cable into a serial port on your com-
puter.
Using the USB Cable
You can use the USB cable on a computer that has a USB port, USB
software support, and runs Windows 98.
Before you can use the USB connection, you need to
install the USB support from the PhotoWise CD. For
details, see Installing PhotoWise Software on page 35 and USB
Notes, which was shipped in the box with your camera.
Transferring Images into Your Computer
You can use PhotoWise to transfer images from the ePhoto CL30 to
your computer. See PhotoWise Tips or on-line help for details. As
Cable
Operating
System
Comments
Serial Windows 95,
Windows NT Supported by most PC computers.
Transfers images at about 115 kb/sec.
USB Windows 98 Transfers images at about 100 MB/sec.