AGFA CL30 - Manual (Page 35)

ePhoto CL30 User’s Guide 35
Using the Camera with a Computer
U SING THE C AMERA WITH A C OMPUTER
Before you can transfer images to your computer, you install the
Agfa PhotoWise software and then connect the ePhoto CL30 to your
computer. The software and cables are included with your camera.
System Requirements
IBM PCs and Compatibles
◗ 486 processor or later (Pentium® recommended)
◗ Windows 95/98 or Windows NT (3.51 or later)
◗ 16 MB RAM
◗ 50 MB available hard disk space
◗ VGA monitor with support for at least 256 colors
◗ 2x CD-ROM drive (required for installation)
◗ 9-pin RS-232C serial port or USB port
Installing PhotoWise Software
Place the Agfa PhotoWise CD in the CD-ROM drive of your com-
puter. The installation begins automatically. Follow the prompts to
complete the installation.
If you install PhotoWise on a Windows 98 computer and
want to use the USB port to transfer images, answer Yes
when prompted to install USB support for the camera. For more
information on using USB, see USB Notes, which was shipped
in the box with your camera.