Abocom WR404 - Manual (Page 2)

SPECIFICATIONS
General
Protocols Supported IP, NAT, ICMP, DHCP client/server, PPPoE, PPP, PAP, CHAP, NTP, HTTP
Firewall /Alert NAT, Stateful Packet Inspection (SPI), DoS (Denial of Service), Intrusion Detection System (IDS), Attack
Alert (Email) /Logging, Access Control, Web URL content filtering,
VPN IPSec (ESP, AH), MD5, SHA-1, DES, 3DES, IKE
IPSec support IPSec-based 56-bit (DES) or 168-bit (3DES) encryption algorithm, MD5 or SHA-1 hashing algorithm,
AH/AH-ESP support, PKI features with X.509 v.3 certificate support, remote access VPN (client-to-site), site-
to-site VPN, IPSec NAT traversal (VPN pass-through)
Management Web-Based configuration and management, or GUI Setup program for Windows 98/ME/NT/2000/XP
WELF-based logging format, SYSLOG, e-mail alerts
Functions 802.11d Multiple regulatory domains
Access Point Radio enable/disable
Power-saving operation
Multiple transmit power levels
Mangement Application Interface (API)
Hidden SSID
Multiple SSID
Intra-BSS Bridging
Configurable fragmentation & de-fragmentation
Configurable RTS/CTS access
Configurable and auto-negotiated long and short preambles
Applications DDNS (Dynamic DNS), Proxy DNS, UPnP, VPN ( IP- Sec ), Virtual Server, Special Internet Applications,
Dial-on-Demand and Auto-Disconnect, Authentication with PAP and CHAP for PPPoE
IP addressing Static IP address assignment on both WAN and LAN
Internal DHCP server on LAN
DHCP client on WAN
PPPoE client support on WAN
Routing RIP v1, RIP v2 (static routing, dynamic routing)
Network Timer SNTP
LED Indicators Power/Error
WAN Link/Act
LAN* Link/Act
Green: Power On; Red: System Error
Green for 100/10M (flashing for activity)
Local (1 – 4 ) Green for 100M/10M (flashing for activity)
Firmware Upgrade HTTP, TFTP download or proprietary network protocol download
LED Indicators Power/Error
WAN Link/Act
LAN* Link/Act
Green: Power On; Red: System Error
Green for 100/10M (flashing for activity)
Local (1 – 4 ) Green for 100M/10M (flashing for activity)
Ports WAN: 2 x 10/100Mbps RJ-45 port for Cable/DSL Modem
LAN: 4 x 10/100Mbps switched ports, UTP Category 5 or better (100Base-TX)
Input power DC 5V, 2.4A