Audiovox ECCO 128-8854 - Manual (Page 7)

7/12
128-8854
Page 7
Return to a Location
1. To wake the unit from Sleep, press Return (e3) for 1
second or until the LCD backlight comes on. The
LCD message Ready appears.
2. To navigate to:
• Last-locked position: simply press return
button (e3).
• Another stored position: press return
button (e3) and location # (e5).
3. Follow the directional arrow (d4) on the LCD
toward the active location (d7). Other information
displayed on the LCD includes compass
direction (d5) and distance (d6).
Note: The unit remains on and active as long as it is
acquiring GPS data to update the direction and
distance information and you are moving more than
30 ft or 9 m every 5 minutes. If not, the LCD
message No Movement appears and the unit goes to
Sleep. Repeat step 1 to wake the unit up. When in
Ready mode, press return button (e3) and the unit
will resume the last selected course location.
4. If you travel off-course (that is, more than
22.5°, are headed in the opposite direction, or
the distance (d6) is increasing), the red LED indicator
(e1) flashes.
5. In the vicinity of 80 ft or 24 m from the active
location (d7), the proximity ring (d3) blinks
alternating large and small rings.
6. In the vicinity of 20 ft or 6 m, the LCD reads
Found, and the proximity ring (d3) blinks
large and small rings simultaneously.
7. After arriving, you can either select another
location or simply do nothing. The unit automatically
goes to Sleep after 2 minutes in the
Found mode (see “Sleep Versus Off” on page 8).