Alto-Shaam AS-250 - Manual (Page 8)

#812 • INSTALLATION / OPERATION / SERVICE MANUAL • 6
C O N T R O L O P E R AT I O N
Cook by Probe:
IS THE MAIN ELECTRICAL POWER SWITCH ON ?
Press and release control O N /O FF Key.
• The green indicator light on the O N /O FF key will illuminate.
• The oven will beep for one second.
• The oven will begin operating in the hold mode.
• The amber hold indicator will illuminate.
• The previously set hold temperature will be displayed.
Press the H OLD Key.
➥
To change the hold temperature, press the U P or D OWN A RROW Keys.
Note: I f t h e o v e n i s b e i n g u s e d f o r h o t f o o d h o l d i n g o n l y , a d j u s t t h e s e t h o l d i n g
temperature. Do not press the C
OOK , T IME , or P ROBE keys.
Press C OOK Key to preheat.
• The green indicator light on the C OOK Key will illuminate.
• Last set cooking temperature will be displayed.
➥
To change the cook temperature, press the U P or D OWN A RROW Keys.
• The green indicator light on the T IME Key and on the P ROBE Key alternately flash.
Press P ROBE Key.
• The green indicator light on the P ROBE Key will illuminate.
• Last set internal product temperature is displayed.
➥
To change the internal product temperature, press the U P or D OWN A RROW Keys.
• The green indicator light on the P ROBE Key will illuminate.
• Halo Heat and Pre-Heat indicator will illuminate.
➥
The oven is automatically programmed to preheat to the cook temperature.
• The oven will beep when preheated and the preheat indicator extinguished.
• Both the Ready and Start indicator lights will flash.
➥
The set cook temperature will be maintained by the oven and appear in the display
while in the ready/start mode.
L o a d t h e f o o d i n s i d e o v e n . R e m o v e p r o b e f r o m i t s b r a c k e t , w i p e t h e p r o b e t i p
w i t h a d i s p o s a b l e a l c o h o l p a d a n d i n s e r t p r o b e p r o p e r l y i n t o t h e p r o d u c t . C l o s e t h e
o v e n d o o r .
Note: Oven will beep 3 times every 25 seconds until oven is loaded and S T A R T Key
pressed.
Press and release S TART key .
COOK
• The oven will beep.
• The green indicators for power, cook, probe, and start will illuminate.
• The display will alternate between showing the probe temperature and the elapsed time.
HOLD
• The oven will beep when the set probe temperature has been reached.
• The green indicator for cook will remain illuminated.
• The display will alternate between showing the set hold temperature and the amount of
time the product has remained in the holding mode.
• Ready indicator light will illuminate after 2 hours in the hold mode.
Note: The ready indicator does not necessarily indicate a product-ready state. For best
results, the product must remain in the oven at the set holding temperature for the
minimum number of hours indicated in the individual cooking instructions.
• The oven will remain operating in the hold mode until the control O N /O FF Key is pressed.
Cold food for
rethermalization
or reheating
must never be
added to the
oven while
hot food is
being held.