Lenovo Erazer X315 Desktop - Manual (Page 37)

32
User Guide
Handling static-sensitive devices
Static electricity, although harmless to you, can seriously damage computer
components.
When replacing a part, do not open the anti-static packaging containing the new
part until the defective part has been removed from the computer and you are
ready to install the new part.
When handling parts and other computer components, the following precautions
should be taken in order to avoid static electricity damage:
• Limit your movements, as movement can cause the build-up of static electricity.
• Always handle parts and other computer components with care, and handle
adapters, memory modules, system boards, and microprocessors by their
edges. Never touch any exposed circuitry.
• Prevent others from touching parts and other computer components.
• Before replacing a new part, first place the anti-static packaging containing the
part against a metal expansion slot cover or other unpainted metal surface on
the computer for at least two seconds. This will reduce static electricity in the
package and your body.
• When possible, remove the new part from its anti-static packaging and install it
directly into the computer without setting the part down. If this is not possible,
place the part on top of its anti-static packaging on a smooth, flat surface
before installing it.
• Do not place parts on the computer cover or other metal surface.