AT&T 1412 - Manual (Page 56)

5 3
PHONE
PROBLEM SOLUTION
To re-initialize the 1 Disconnect the power to the base.
handset and base:
2 Remove the handset battery pack.
3 Wait at least 15 seconds.
4 Insert the handset battery pack.
5 Connect the power to the base.
PROBLEM SOLUTION
If you hear noise or • You may be out of range. Move closer to
interference when the base.
using the phone:
• Press or until the screen displays
, then press . If
noise is exceptionally loud,move closer
to the base before changing channels.
• Household appliances plugged into the
same circuit as the base can sometimes
cause interference. Try moving the
appliance or the base to another outlet.
• The layout of your home or office may
be limiting the operating range. Try
moving the base to another location,
preferably on an upper floor.
• Using the handset near household
appliances (microwaves,computers,
televisions,stereos,etc.) can sometimes
cause interference. Move away from
appliances while using the handset.
PROBLEM SOLUTION
If you hear other calls • Press or until the screen displays
while using your phone: , then press .
• Disconnect the base from the modular
j a ck and plug in a corded telephone. I f
you still hear other calls, the pro blem is
p ro b ably in your wiring or local serv i c e .
Call your local telephone service company.
1412 2002.12.7 9:20 AM Page 53