Lenovo IdeaCentre Q200 - Manual (Page 21)

Chapter 5. Using the Setup Utility
19
press Enter.
4. when prompted to confirm the password, type the password again. If
you type the password correctly, the password will be installed.
To delete a previously set user password, do the following :
1. From the Security menu, select Set User Password and press Enter.
2. when you type the user password. a message will display that Enter
New Password. Press Enter and a message will display that indicates the
password has been disabled.
3. Press any key to contine.
Using Device
PS/2 Mouse Support When this feature is set to Disable,
the device of PS/2 Mouse Support is
disabled and will not be displayed in
the system configuration.
To set Device, do the following:
1. Start the Setup Utility program (see “Starting the Setup Utility program”
on page 16).
2. From the Setup Utility program menu, select Device.
3. Select PS/2 Mouse Support.
4. Select Disabled or Enabled or Auto and press Enter.
5. Return to the Setup Utility program menu and select Exit and then Save
changes and Exit.
Note
If you do not want to save the settings, select Discard Changes and
Exit or Discard Changes. You can set others such as Floppy Drive
Setup,Serial Port Setup,Parallel Port Setup,USB Setup,ATA Drives
Setup,Video Setup,Audio Setup,Network Setup and so on. See the
information displayed on the right side of the screen.